As a dedicated Myrtle Beach driveway contractor serving Grande Dunes, The Dunes Club, and The Market Common, as well as full driveway replacement across Pine Lakes, Socastee, and Forestbrook, our local crews build without shortcuts.
We engineer pavers over AASHTO M288 geotextile, #57 stone, compacted ABC aggregate, and M10 granite screenings alongside 4,000 PSI 6"x6" welded steel wire-grid concrete, preparing every HOA/ARB and permit packet while protecting Zoysia sod and sprinkler lines across 3–5 day installs.
Myrtle Beach neighborhoods span two distinct permitting desks and sit directly atop Atlantic marine sand and seasonal high water tables. We engineer every apron and base around those exact conditions.
Properties inside Myrtle Beach City limits (Grande Dunes, Pine Lakes, Market Common) coordinate street-apron changes with City Public Works and Planning. Unincorporated 29577 corridors in Socastee and Forestbrook pull Horry County Engineering or SCDOT encroachment permits before any curb-cut widening begins.
Shallow coastal water tables along Kings Highway and Ocean Boulevard push saturated fine sand upward into unlined beds. Our 5-layer assembly pairs AASHTO M288 woven geotextile under #57 crushed stone sub-base, compacted ABC aggregate road base, and 1" screeded M10 granite screenings.
Standard 4,000 PSI broom concrete ($18–$20/sq ft) pours over compacted coastal sand with a 6"x6" heavy-gauge welded steel wire grid (ASTM A1064) and micro-fiber. For soft coastal fill or high water tables, add our optional 4" compacted #57/ABC stone sub-base upgrade (+$3.00–$5.00/sq ft).
Driveway engineering requirements shift dramatically across Myrtle Beach’s 29572 and 29577 ZIP codes. Along the oceanfront and north-end Intracoastal corridor in Grande Dunes, The Dunes Club, and Briarcliffe Acres, homeowners overwhelmingly choose 80mm or 60mm ASTM C936 interlocking concrete pavers ($24–$28/sq ft) with multi-piece architectural slabs, tumbled accents, and sweeping flared motor courts set over compacted #57 stone, ABC aggregate, and M10 granite screenings.
South in The Market Common, dense urban alleyways and compact front courtyards demand cool-touch Spray Deck Concrete Driveways ($24–$28/sq ft), zero-slop laser screed tolerances, and positive slope toward storm drains. Meanwhile, established 1980s–2000s homes in Pine Lakes, Socastee, and Forestbrook face severe pine-root heaving across aging builder slabs. Full demolition (+$2.50–$4.00/sq ft) and driveway replacement with 4,000 PSI wire-grid concrete or flexible pavers stops recurring moisture pooling.
Engineered with AASHTO M288 geotextile, #57 crushed stone, compacted ABC road base, 1" M10 granite screenings, and charcoal border soldiers for rapid rain shedding.
Locked 2026 Grand Strand square-foot pricing including excavation, steel wire-grid or aggregate base stack, and coastal finishing. 250 sq ft minimum installation ($4,500 minimum project).
| Driveway System | Installed Range (/ sq ft) | 650 sq ft 2-Car Estimate | Myrtle Beach Base & Structural Spec | Best Fit Neighborhoods |
|---|---|---|---|---|
| 4,000 PSI Coastal Broom Concrete | $18 – $20 | $11,700 – $13,000 | Compacted coastal sand subgrade, 6"x6" ASTM A1064 welded steel wire grid + micro-fiber, salt sealer | Socastee, Forestbrook, Pine Lakes |
| Spray Deck Concrete Driveways | $24 – $28 | $15,600 – $18,200 | Heat-reflective knockdown acrylic finish over 4,000 PSI 6"x6" steel-wire-grid concrete | Market Common, Briarcliffe Acres |
| Interlocking Brick & Stone Pavers | $24 – $28 | $15,600 – $18,200 | AASHTO M288 geotextile, #57 stone, compacted ABC base, 1" M10 granite screenings, 60mm/80mm pavers | Grande Dunes, Dunes Cove, Myrtlewood |
| Permeable Coastal Pavers (PICP) | $30 – $36 | 550 sq ft: $16,500 – $19,800 | Open-graded #89/#57/#2 washed stone reservoir (≥ 2 in/hr stormwater relief) | High-coverage City lots & flood zones |
| 4" Compacted #57 / ABC Sub-Base Upgrade | +$3.00 – $5.00 | +$1,950 – $3,250 | 4" compacted #57 / ABC crushed stone sub-base under concrete or Spray Deck | Soft coastal fill & boat/RV loads |
| Existing Concrete Tear-Out & Haul-Off | +$2.50 – $4.00 | +$1,625 – $2,600 | Hydraulic breaking, root-zone clearing, off-site disposal & subgrade re-crown | 1980s–2000s Pine Lakes & Socastee homes |
Explore neighboring service zones or run exact dimensions in our real-time cost and lot-coverage estimator.
3rd-car wire-grid concrete extensions ($18–$20/sq ft), paver ribbons ($24–$28/sq ft), and free HOA/ARB packets for Waterway Palms & Plantation Lakes.
View Carolina Forest Specs →City ≥ 2 in/hr permeable PICP ($30–$36/sq ft), Barefoot Resort HOA pavers, and Cherry Grove under-piling slabs.
View North Myrtle Beach Specs →R-1 (40%) and R-3 (50%) impervious cap compliance, Town Stormwater Worksheets, and 72-hour rental-turnover installs.
View Surfside Beach Specs →200°F hot-water cleaning, PolySweep or SEK joint stabilization, and breathable Trident Cyclone, Typhoon & CAT 4/5 driveway sealing.
View Myrtle Beach Sealing →If your home sits inside Myrtle Beach municipal limits (Grande Dunes, Pine Lakes, or The Market Common), widening or changing a street curb cut triggers a City Planning and Public Works encroachment review. Unincorporated 29577 areas like Socastee and Forestbrook follow Horry County Engineering rules, while state roads require SCDOT sign-off. As a Myrtle Beach driveway contractor, Driveway Kings verifies parcel authority before excavation.
Most 1980s through 2000s driveways in Pine Lakes, Briarcliffe Acres, Socastee, and Forestbrook were poured with unreinforced 3,000 PSI concrete directly on unstabilized sand or pine-root soils. Shallow pine and live-oak roots lift thin slab edges while high coastal water tables wash out sand underneath. Full tear-out (+$2.50-$4.00/sq ft) and driveway replacement over AASHTO M288 woven geotextile, #57 crushed stone, compacted ABC aggregate road base, and 1-inch M10 granite screenings stops sub-base pumping permanently.
Yes. Grande Dunes, Dunes Cove, and The Market Common architectural boards require verified paver profiles, multi-piece stone color blends, charcoal soldier-course borders, or cool-coastal Spray Deck textures. We prepare scaled survey overlays and manufacturer finish spec sheets for ARB sign-off prior to pulling permits.
Installed Myrtle Beach driveway pricing runs $18-$20/sq ft for 4,000 PSI coastal broom concrete with 6x6 ASTM A1064 heavy-gauge welded steel wire grid (+$3.00-$5.00/sq ft for the optional 4-inch compacted #57/ABC stone sub-base upgrade), $24-$28/sq ft for Spray Deck concrete driveways or interlocking pavers, and $30-$36/sq ft for permeable PICP pavers. Existing concrete tear-out adds $2.50-$4.00/sq ft, and all projects carry a 250 sq ft ($4,500 minimum) installation threshold.
